Tube
Ultralight inflatable mat with integrated pump
Main advantages
Used materials
To prevent air leakage through the top fabric of the mattress, an impermeable membrane is laminated to the polyester fabric. Laminating a continuous membrane instead of applying a coating eliminates the possibility of applying an uneven layer of coating, which could lead to the weakening of some parts and subsequent air leakage.
Detailed Description
Burgundy classic polished to perfection
Ultralight and exceptionally packable mat with an integrated pump made of durable material, suitable from spring to autumn.
As the material, we used proven polyester with a lamination of an impermeable membrane, equipped with RipStop treatment in the shape of diamonds - this increases the durability of the fabric and prevents further rippling in the event of a tear.
Two valves, made of nylon, are very durable and partially flexible, thanks to which they seal perfectly.
Thanks to the integrated pump, you will no longer have to struggle with inflation, no more dizziness or dizziness. Simply open the valve and after two minutes of stomping, you're ready to lie down.
Technical specification
| features: | |
| Dimensions | 183 x 50 x 7 cm |
| Shape | Rectangle |
| Weight | 600 g |
| Upper material | Polyester Diamond RipStop, TPU Lamination |
| Bottom material | Polyester Diamond RipStop, TPU Lamination |
| Valve | Nylon, 2x |
| Repair kit | Yes |
| Carry bag | Yes |
| Type | Inflatable |
| Height | 6 cm and more |
| Package Size | ⌀10 x 25 cm |
| features: | |
| Estimated value of heat resistance | 1.2 R |
And how is it handled?
In principle, the integrated foot pump is a very simple device. It consists of a chamber made of impermeable foam, a one-way flap and a lid.
After you open the lid, the chamber fills with air. Your task is to step on the entire chamber in such a way that you close the opening with your foot and push the air out of the chamber through the flap into the mat.
Then you lift your foot so that new air from the outside enters the chamber and step down again as described above. Repeat this until the mat is inflated and then close the lid.
The last step is to make sure the silicone flap in the drain valve is tight. You do this by unscrewing the valve cover and observing the following three possibilities.
- You hear a short blow that suddenly stops - the flap was loose but just clicked into place and everything is OK
- You can't hear anything - the damper is already in place - everything is OK
- It can happen that the flap gets stuck and the entire mat deflates - you need to gently direct the flap into place by tapping or pressing. Repeat the whole process.
Lamination
Storage chambers
The tube was created with an emphasis on low weight and good packability. The burlap chambers are made by gluing the outer fabrics together, so we were able to save weight by dropping the partitions.
Because the Tube is three-season, we also dropped the BHB Micro insulation, saving even more space.
